Category Archives: Latest Posts

Transportation and Limo Services for the Next Inventors Congress

Whatever your reasons are for going to the next Inventors’ congress you can get there using some handy transportation options.  We like to encourage all attendees to handle there transport using some of these options as it cuts down on use of the venues garage, encourages carpooling (which can spur networking and conversation) and can be less expensive (when using group rates) then paying for individual parking.

Reasons to Get Transportation to the Venue

Here are reasons why you should opt for the service instead of taking your own car:

You Don’t Have to Drive: If you don’t feel like driving and want to travel in maximum comfort, there’s no better way than to seek a limo service. With a chauffeur driving, you can sit back and relax; leaving the stresses of driving to someone else. It is also safer if you’re not in the mood or are too distracted to drive.

No Worries about Parking: If driving your own car, you would have to look for parking space and probably walk a bit if the closest parking to your destination is full. With a limo service, you are dropped off at the entrance and picked from the same spot when you are done.

Keep the Group Together: Letting everyone find their own means of transport means that people will arrive at different times. With a limo service and depending on the arrangement with the group, the driver can pick up everyone from different locations. For larger groups there are 50 passenger party bus charters that not only act as transport but can also be a place for partying and relaxation after the event. You’ll be able to travel together and arrive at the same time, so there are no delays as a result of waiting for others to arrive. You can also engage in conversation and enjoy each other’s company.

These are cost-effective and afford you comfort, and the VIP feel. The driver should know the area and the routes to your destination so that you don’t have to worry about getting lost. It is worth the money if the right service is selected.

Who Invented the Washing Machine, And Other Home Appliances?

Technology plays an important role in making your everyday easy, simple and quick as it also helps you to save a considerable amount of time with the use of different home appliances. As there are different kinds of home appliances like washing machine, refrigerator, dryer, mixer grinder and other home appliances that are designed for different tasks and as a homeowner, you should know who invented the washing machines, and other home appliances? Home appliances are known to make your life significantly easier and convenient so that you can pay attention to the other important tasks of your life.

Who invented the washing machines, and other home appliances?

Washing machine

The first washing machine that was used for washing clothes is known as Thor and it was invented by James King who patented this machine.  This machine had a lot of resemblances with the modern washing machine, so much so that a general appliance repair service might recognize it today. It was electric powered and rotary washing machine that consists of an electric motor and galvanized tub that served the purpose of washing clothes.


the first design of refrigerator was invented by Oliver Evans but the working unit of the appliance was created by John Gorrie which was done for creating a cooling atmosphere. But Carl Von Linden made use of the improved method for liquefying gas and he patented it which later turned into practical refrigerator that is being used in the present time. The gas compound that is being used is safer compounds and it helps in compressing and heating up so that the inside air of the refrigerator can become cool.


The first and foremost version of this home appliance was patented in Shelbyville by Josephine Garis Cochran and it was used for washing dishes quickly than any individuals along with ensuring that does not get broken. The wire compartments of the dishwasher were made in accordance with the sizes of the plates, cups, saucers and other cookware. It worked with the help of motor that helps in washing the dishes with hot soapy water so that it can be cleaned without putting in a lot of efforts. Even though dishwasher was previously used by the hotels and restaurants, it is widely being used by a large number of households presently which helps in making the task of washing dishes quickly and efficiently.

Mixer grinder

It is also an important an important home appliance that is widely used by a large number of home owners for grounding different spices and other food items. It is run by electricity and it was invented in the year 1898 by Hobart manufacturing company and it was a standing electric mixer that helps in mixing and grinding food items to a smooth paste or powder.

There are many other home appliances that are used for everyday task as these are known to be the most beneficial tools for homeowners who are looking for ways to simplify their everyday household chores. These home appliances also help in making life even more convenient so that there is no need of lot of hard work and efforts.


Mejor cosas casa – Spanish information of various home appliances.

The World’s Greatest Invention Since Sliced Bread – Footwear

Every once in a while, we like to have a look at some of the world’s greatest, historic inventions. While inventing new things is mostly geared towards changing the future, sometimes it can help to reflect upon the unchangeable past. To spend a few seconds in awe of how our ancestors have changed the course of history with inventions that were once revolutionary, but which we have now grown accustomed to. Once such invention is footwear. Do you ever think about what you’re wearing? Probably not. And that’s because footwear is now so ingrained in our society, that we don’t even give it a second though. We simply accept the fact that it is here. This is truly the hallmark of a great invention.

The Birth Of Footwear

The earliest footwear that we know of mankind’s history, are sandals that are thousands of years old, first made in 7000 to 8000 BC. These shoes were found in a cave near Oregon in 1938. These shoes were made of cowhide and were laced with a leather cord. It had seams in the front and the back. Since people didn’t have advanced technology back then, this was as good as it was ever going to get. Since cowhide protects you from outside elements, but it doesn’t cushion you, they stuffed the the shoes with straw. Imagine having to wear those kinds of shoes, after being used to your New Balances and your Sketchers.

Just because these shoes are the oldest that have ever been found, it doesn’t mean that these are in fact the oldest shoes that have ever existed. It is thought that before this time period, people were also making and wearing shoes. But since the material used before this time were so perishable, nothing is left of the shoes. The cowhide shoes from the 7000 to 8000 BC period, is how people made shoes all the way up until the middle ages.

The Middle Age Revolution

The middle ages are sometimes known for being a period in time when people were stubbornly backwards and wanted to halt all progress. But that’s not entirely correct, as there most definitely has been a lot of progress in this era. Take for example the middle aged shoes called ‘espadrilles’. These are a type of sandals that have jute soles which are braided. The uppers are made of fabric. They also used to include laces made of fabric, which would tie around the foot’s ankle. The espadrilles were named after esparto grass, the fiber from which they were made. Espadrilles find their origin in the Catalonian region, which you will find in Spain. The first espadrilles were made in the 13th century. They were very popular with the peasants in the farming communities that were situated close by.

Espadrilles were constructed using the so called ‘turnshoe’ method. With this method, the upper was turned inside out and was then lasted onto a sole. A seam was then used to join them at the edges. You could get all sorts of espadrilles, such as ones with drawstrings or toggled flaps. This would allow the wearer to tighten the shoe around the foot and make it fit better. The turnshoe method was used up until the 15th century. At this time it became obsolete and was replaced by the so called ‘welted rand’ method. With this method, the uppers are sewn to a sole which is much stiffer and it is impossible to turn the shoe inside out. You’d think the turnshoe method would be a historic relic in the 21st century. But to this day, it is still used for some specialty shoes, such as dance shoes.

The Industrial Revolution

When the 18th century came about, shoe making became way more commercialized than it had ever been before. It became what is known as a cottage industry. A cottage industry is an industry that could be called small scale, because the creation of goods is home based rather than factory based. Goods aren’t mass produced, so the quality of the produced goods could vary from home to home. Or even from one week to another within the same home. The total amount of shoes produced from this cottage industry was large enough that they had to be stored in warehouses.

Then came the 19th century. By this time, the making of footwear had been almost entirely mechanized. The industry was transforming from a cottage industry into a factory industry. Shoes were now being mass produced. But since many different people have many different foot sizes, factories still produced shoes of many different shapes and sizes.

The mass production of shoes was, unfortunately, powered by war. During the time when Napoleon was waging battles, it was inventor Marc Brunel who came up with a machine for mass producing footwear for Brittish soldiers. Thanks to Brunel, the Brits were capable of providing their soldiers with a way of standing, walking and running for miles on end, without fearing they’d ever run out of good boots. It was the year 1812 in which Brunel came up with his automated boot making machine, which fastened soles to the uppers using nails or pins made of metal.

You’d think that, after having automated boot production, Brunel would’ve kept generating riches for decades on end. But as bad luck would have it, the war ended in 1815. This resulted in manual labor becoming much cheaper and the demand for footwear declined. Brunel’s invention was no longer profitable and he was forced to cease his business.

The Modern Day Revolution

This day and age, automation in shoe making has advanced much beyond Brunel’s machine. More and more aspects of the creation process have become automated. But make no mistake, there are still many manual actions being performed in the creation of a shoe. These days, you hear more and more about artificial intelligence and robots taking over our work. It could very well be that, one day, shoemaking will be entirely automated. However, we are not quite there yet. We’d love to see the day, though. And something tells us we won’t have to wait many more decades to find out!

Special Thanks to our Sponsors!

We at will like to take a moment to spread some love to our gracious sponsors.  All coming from the Minnesota/Twin Cities area, these local companies have really stepped up to help support the wonderful innovation and advancement that is provided by the congress each year.

First shout goes to Aagard, a Case Packer solution company based out of Alexandria, MN.  With a history stretching back over 20 years, they have been a staple of the local economy, and have graciously supported the congress.  See their contact info below:

Aagard Group

3711 Iowa Street

Alexandria, MN 56308

Phone: 320.759.4052

Secondly shout goes to Dominate with SEO, a Minneapolis SEO Consultant firm that helps local businesses to grow and prosper using digital media.  They share many the same values as the congress, in that growth and prosperity through innovation and hard work is a main goal of both of us.  Thank you so much for your support

Dominate with SEO
80 S. 8th St. Suite 900
Minneapolis MN 55402

Phone: 612-400-8245

How to Become a Sponsor!

If you are interested in becoming a sponsor, you can email us at sponsorships(at) to discuss.

Learn the Business of Invention

Inventors usually perceive themselves as pioneers in their own field. To some extent, that may be true. However, you must understand that you will not be setting out on your own for the sake of pure knowledge and innovation. Rather, prospective inventors need to understand that they have to treat their inventions as they would any new business venture. It’s important to understand the invention definition in business.  This is because essentially that is what we do – the very process of inventing is a form of business.

Learning the trade is the first step. Like with any industry, you will need to give yourself a proper education on how the business of invention works. This is crucial because you cannot go around spending money without having a clear understanding of the basic processes.

You will need to pay particular attention to the patenting process. You need to understand how your idea can eventually lead to royalty payments. Basically, you need to know how your ideas can be transformed into a prototype and how that can reach your target market. Memorize the steps by heart, as that will most likely be your bread and butter for the years to come.

Researching Ideas

Inventors must always have a firm grasp of the things they want to do. That is why it is crucial that once you have a concept in mind, you do your best to take that idea further.

You must understand that just because you thought of something great does not mean that you were the first to do so. That is why research is the first thing you have to do. This is pretty basic. For instance, you can simply look it up online to see if there are any matches. You can also look at those big retail stores to see if they are carrying any products that may seem similar to the one you have in mind. Finally, you have to check with the patent office if there is an existing patent on that particular idea.

If everything checks out, then you can go ahead and develop it further. If not, then do not be discouraged. It just means that your mind was on the right track. That being said, it is just a matter of time before another brilliant idea comes along. So just keep doing what you’re doing.